Basic Operation; Playing A Source - Yamaha DSP-E800 Owner's Manual

BASIC OPERATION

2
NATURAL SOUND AV PROCESSOR/AMPLIFIER DSP–E800
STANDBY/ON
– SET MENU + NEXT TAPE/MD MON EFFECT
/6CH INPUT
POWER
2
PROGRAM
/DTS MOVIE MOVIE
SUR. THTR 1 THTR 2
1 2 3
6
MONO MOVIE TV SPORTS DISCO
4 5 6
ROCK HALL
7 8
TEST EFFECT
DSP
TIME/LEVEL SET MENU
6CH INPUT
3
CD TUNER TAPE/MD
1
Set VOLUME to the "m"
position.
2
Turn the power on.
STANDBY/ON
Front panel
3
Select the desired input
source with INPUT
SELECTOR (or the input
selector buttons). (Turn on
the TV monitor for video
sources.)
The name of the selected input
source appears for a moment
and the arrow for the selected
input source indicator lights up
on the display.
Input source
E-16

PLAYING A SOURCE

3
D I G I T A L
CINEMA DSP DOLBY
D I G I T A L
S U R R O U N D
VOLUME
INPUT SELECTOR
16
20
28
40
INPUT MODE
60
00
–dB
PROGRAM
6
3
CD TUNER TAPE/MD
DVD/LD D–TV VCR
CBL/SAT
SLEEP MUTING
– +
VOLUME
5
VOLUME
16
20 12
28 8
40 4
60 2
00 0
–dB
Front panel
POWER
or
Remote control
INPUT SELECTOR
Front panel
or
CD TUNER TAPE/MD
DVD/LD D – TV VCR
CBL/SAT
Remote control
DVD/LD TUNER
D–TV CD
VCR CBL/SAT
a. To select a tape or an MD source
1,5
Press TAPE/MD MON / 6CH INPUT (or TAPE/MD)
so that the "TAPE/MD MONITOR" indicator lights up
12
8
on the display.
4
2
TAPE/MD MON
0
Front panel
b. To select a source connected to the 6CH
INPUT terminals
Press TAPE/MD MON / 6CH INPUT repeatedly (or
6CH INPUT) until "6CH INPUT" appears on the
display.
TAPE/MD MON
Front panel
Notes
• If the "TAPE/MD MONITOR" indicator lights up or "6CH
INPUT" is shown on the display, no other audio source except a
tape/MD source and a source connected to the 6CH INPUT
terminals can be played. To select another input source with
INPUT SELECTOR (or the input selector buttons):
– Press TAPE/MD MON / 6CH INPUT twice (or TAPE/MD
once) to turn off the "TAPE/MD MONITOR" indicator.
– Press TAPE/MD MON / 6CH INPUT once (or 6CH INPUT) to
turn off "6CH INPUT".
• If you select and play a video source when the "TAPE/MD
MONITOR" indicator lights up, the play back result will be a
video image from the video source and the sound from the audio
source connected to the TAPE/MD IN (PLAY) terminals.
• A video source cannot be selected when "6CH INPUT" is shown
on the display. If you want to enjoy an audio source connected to
the 6CH INPUT terminals together with a video source, first
select the video source and then select the source connected to the
6CH INPUT terminals.
y
For the DVD/LD, D-TV and CBL/SAT sources, the current input
mode is also shown. Refer to page 18 for details about the input
mode.
TAPE/MD
or
/6CH INPUT
Remote control
6CH INPUT
or
/6CH INPUT
Remote control
DVD/LD TUNER
D–TV CD
VCR CBL/SAT
TAPE/MD
MONITOR
Lights up
DVD/LD TUNER
D–TV CD
VCR CBL/SAT