Wiring Of The [Speakers] Connectors; 5-Way Binding Post Connectors; Speakon Connectors - Yamaha TX6n Owner's Manual

Wiring of the [SPEAKERS] Connectors

Turn off the POWER switch before connecting external devices to the TXn.

5-way Binding Post Connectors

No Plugs
Remove about 13mm of insulation from the end of each
speaker cable, and pass the bare wire through the holes in
the appropriate speaker terminals. Tighten the terminals to
securely clamp the wires. Be sure that the bare wire ends do
not jut out from the terminals and touch the chassis.
13mm
Y-plugs
From above, insert the Y-plugs all the way into the opening,
and tighten the terminals.
0.25"
(6.3mm)
≤0.51"
(12.9mm)

Speakon Connectors

Insert the Speakon cable plug (Neutrik NL4) into the con-
nector, and turn it to the right to lock it.
Neutric NL4 plugs
+
1
–
1
CHANNEL A
Stereo/Parallel Mode
Neutrik Amplifier
1+ A+
1– A–
2+ B+
2– B–
Bridge Mode
Neutrik Amplifier
1+ +
1–
2+ –
2–
CHANNEL B
Neutrik Amplifier
1+ B+
1– B–
2 –
2 +
13
TX6n/5n/4n Owner's Manual