Download Print this page
ConvaTec NATURA Manual

ConvaTec NATURA Manual

Cut-to-fit accordion baseplate

Advertisement

Quick Links

NATURA
Cut-To-Fit Accordion Baseplate
1
Accordion baseplate application
Measure the stoma and
select the appropriate
size baseplate.
2
Closing a drainable pouch
TIP
If using a drainable pouch
over a closed pouch, we
recommend you close the tail
closure before applying your
pouch to the baseplate.
TM
Trace the stoma size on the
centre of the white release
paper on the reverse of
the baseplate, then cut
1/8" (3mm) larger than your
tracing.
Roll the end up towards the
pouch until the interlocking
closures line up. Press and
pinch around the closure to
secure.
Peel off release liner
and centre the opening
over the stoma. Apply to
clean dry skin.
Turn the Lock-it-Pocket
Remove white release paper
and press against the skin.
Smooth the tape collar and
hold the baseplate in place
for 30 seconds.
TM
inside-out to tuck
tail inside.

Advertisement

loading
Need help?

Need help?

Do you have a question about the NATURA and is the answer not in the manual?

Questions and answers

Summary of Contents for ConvaTec NATURA

  • Page 1 NATURA Cut-To-Fit Accordion Baseplate Accordion baseplate application Measure the stoma and Trace the stoma size on the Peel off release liner Remove white release paper select the appropriate centre of the white release and centre the opening and press against the skin.
  • Page 2 Only remove the where appropriate. with a new, clean pouch. baseplate if replacing with a new, clean baseplate. For more information, call us on - 0800 282 254 ® indicates trademarks of ConvaTec Inc. © 2016 ConvaTec Inc. AP-016062-GB OST037...