Checking The Watch Charge Level; Connection; Connecting With A Phone; Disconnecting From A Phone - Casio 5631 Operation Manual

Checking the Watch Charge
Level
Use the procedure below to check the current
charge level with G-SHOCK Connected.
1. Y
Tap the "G-SHOCK Connected" icon.
2. X
Hold down (C) for at least 1.5 seconds.
Release the button when [CNCT] starts to
flash.
When a connection is established
between the watch and phone, [CNCT]
will stop flashing and the second hand will
move from [READY] to [CONNECT].
If connection fails for some reason,
●
[ERR] will appear on the display
momentarily and then the watch will
return to the mode it was in before you
started the connection procedure.
Trying to connect
3. Y
Use G-SHOCK Connected to check the
charge level.
Operation Guide 5631

Connection

Connecting with a Phone

This section explains how to establish a
Bluetooth connection with a phone that is
paired with the watch.
If the watch is not paired with the phone you
●
want to connect with, refer to the information
below and pair them.
Pair the watch with a phone.
l C
1.
Move the phone close to (within one meter
of) the watch.
2. X
Hold down (C) for at least 1.5 seconds.
Release the button when [CNCT] starts to
flash.
When a connection is established
between the watch and phone, [CNCT]
will stop flashing and the second hand will
move from [READY] to [CONNECT].
Connected
If connection fails for some reason,
●
[ERR] will appear on the display
momentarily and then the watch will
return to the mode it was in before you
started the connection procedure.
Trying to connect
Important!
If you have problems establishing a
●
connection, it could mean that G-
SHOCK Connected is not running on
the phone. On your phone's home
screen, tap the "G-SHOCK
Connected" icon. After the app starts
up, hold down the watch's (C) button
for at least 1.5 seconds.
Note
The connection will be terminated if
●
you do not perform any operation on
the watch or phone for a fixed amount
of time.
To specify the connection limit time,
perform the following operation with G-
SHOCK Connected: "Watch
settings"
select a setting of 3 minutes, 5 minutes,
or 10 minutes.

Disconnecting from a Phone

Pressing any button will terminate a Bluetooth
connection and return to the Timekeeping
Mode.
Connected
Connected

Unpairing

Unpairing the watch from a phone requires
both G-SHOCK Connected and watch
operations.
Deleting Pairing Information from G-
●
SHOCK Connected
1. X
If the watch is connected with a phone,
press any button to terminate the
connection.
Connected
2. Y
Tap the "G-SHOCK Connected" icon.
3. Y
Perform the operation shown on the
phone screen to unpair.
"Connection time". Next,
n
Disconnected
Disconnected
8