Configuring World Time Settings - Casio 5631 Operation Manual

Note
If the watch does not indicate the
●
correct time even if is able to connect
with a phone, adjust the hand
positions.
Adjusting Hand Alignment
l
If there is a World Time City specified
●
with G-SHOCK Connected, its time will
also be adjusted automatically.
The watch will connect with the phone
●
and perform auto time adjustment at
around 12:30 a.m., 6:30 a.m., 12:30
p.m. and 6:30 p.m. The connection is
automatically terminated after auto
time adjustment is complete.
The watch cannot connect with a
●
phone for time adjustment while a
stopwatch measurement or timer
operation is in progress.
Triggering Immediate Time Adjustment
●
The watch's time setting will be adjusted
automatically whenever you establish a
connection between the watch and a phone.
Whenever you want to trigger immediate time
adjustment, perform the procedure below to
connect with a phone.
1.
Move the phone close to (within one meter
of) the watch.
2. X
Press (C).
[SET] flashes to indicate that the watch
has started the connection operation.
Once the watch and phone are
connected, [OK] will appear, and then the
watch will adjust its time setting based on
information from the phone.
Trying to connect
Note
You can perform the above operation
●
for time adjustment from any watch
mode.
The connection is terminated
●
automatically after time adjustment is
complete.
If time adjustment fails for some
●
reason, [ERR] will appear.
Operation Guide 5631
Configuring World Time
Settings
Specifying a World Time City with G-SHOCK
Connected causes the watch's World Time
City to change accordingly. Watch settings
can be configured for auto summer time
switching for the World Time City.
Note
G-SHOCK Connected World Time lets
●
you select from among approximately
300 cities as the World Time City.
You can use G-SHOCK Connected to
●
configure settings for user cities that
are not included in the watch's built-in
World Time Cities. You can then use
G-SHOCK Connected to select a user
city as your World Time City.
Selecting a World Time City
●
1. Y
Tap the "G-SHOCK Connected" icon.
2. X
Hold down (C) for at least 1.5 seconds.
Release the button when [CNCT] starts to
flash.
When a connection is established
between the watch and phone, [CNCT]
After time
will stop flashing and the second hand will
adjustment
move from [READY] to [CONNECT].
If connection fails for some reason,
●
[ERR] will appear on the display
momentarily and then the watch will
return to the mode it was in before you
started the connection procedure.
Trying to connect
3. Y
Perform the operation shown on the
phone screen. The World Time setting will
be reflected on the watch.
Configuring the Summer Time Setting
●
1. Y
Tap the "G-SHOCK Connected" icon.
2. X
Hold down (C) for at least 1.5 seconds.
Release the button when [CNCT] starts to
flash.
When a connection is established
between the watch and phone, [CNCT]
will stop flashing and the second hand will
move from [READY] to [CONNECT].
If connection fails for some reason,
●
[ERR] will appear on the display
momentarily and then the watch will
return to the mode it was in before you
started the connection procedure.
Trying to connect
3. Y
Perform the operation shown on the
phone screen to select a summer time
setting.
"Auto"
●
The watch switches between standard
time and summer time automatically.
"OFF"
●
The watch always indicates standard
time.
"ON"
●
The watch always indicates summer
time.
Note
While the summer time setting is
●
"Auto", the watch will switch between
standard time and summer time
automatically. You do not need to
switch between standard time and
summer time manually. Even if you are
in an area that does not observe
summer time, you can leave the
watch's summer time setting as "Auto".
Connected
For information about summer time
●
periods, refer the "Summer Time
Table" or G-SHOCK Connected.
Connected
6