Selecting Utc (Coordinated Universal Time); Swapping Your Home Time And World Time; Measuring Elapsed Time; Measuring A Split Time - Casio 5631 Operation Manual

Note
While [UTC] is selected as the city, you
●
will not be able to change or check the
summer time setting.
If you select a World Time City with G-
●
SHOCK Connected and then change
to a different city with a watch
operation, the G-SHOCK Connected
city information is deleted from the
watch.
Configuring World Time Settings
l
Selecting UTC (Coordinated
Universal Time) as Your
World Time City
In the World Time Mode, pressing (B) and (E)
at the same time will set UTC (Coordinated
Universal Time) as the World Time City and
display its current time.
Swapping Your Home Time
and World Time
In the World Time mode, press (A) and (L) at
the same time to swap your Home City time
with your World Time.
Before swapping After swapping
World Time Home Time
Home Time World Time
Note
This function comes in handy when
●
you need to move to another time
zone. For details about how to use it,
go to the section below.
Moving to Another Time Zone
l
Operation Guide 5631
Stopwatch
The stopwatch measures elapsed time in
1/1000-second units for the first hour, and in
1/10-second units after that for up to 24 hours.

Measuring Elapsed Time

1.
Enter the Stopwatch Mode.
Navigating Between Modes
l
2.
Use the operations below to measure
elapsed time.
Elapsed time is shown in 1/1000-
●
second units for the first hour of the
measurement session. After the first
hour, elapsed time is shown in 1/10-
second units.
First hour
Minutes, seconds,
1/1000 seconds
3.
Press (B) to reset the stopwatch to all
zeros.
E
Start
E
Stop
E
Resume
E
Stop
After first hour
Hours, minutes,
seconds, 1/10 seconds

Measuring a Split Time

1.
Enter the Stopwatch Mode.
Navigating Between Modes
l
2.
Use the operations below to measure
elapsed time.
Pressing (B) displays the elapsed time
●
from the start of a race up to the point
when you pressed the button (split
time).
E
Start
B
Split
B
Split release
E
Stop
Elapsed time is shown in 1/1000-
●
second units for the first hour of the
measurement session. After the first
hour, elapsed time is shown in 1/10-
second units.
First hour After first hour
Minutes, seconds, Hours, minutes,
1/1000 seconds seconds, 1/10 seconds
3.
Press (B) to reset the stopwatch to all
zeros.
10