Nvidia Mellanox ConnectX-6 MCX654106A-ECAT User Manual page 69

Specifications
MCX651105A-EDAT Specifications

Please make sure to install the ConnectX-6 card in a PCIe slot that is capable of supplying the
required power and airflow as stated in the below table.
Physical Adapter Card Size: 6.6 in. x 2.71 in. (167.65mm x 68.90mm)
Connector: Single QSFP56 InfiniBand and Ethernet (copper and optical)
Protocol
InfiniBand: IBTA v1.3
Support
Auto-Negotiation: 1X/2X/4X SDR (2.5Gb/s per lane), DDR (5Gb/s per lane), QDR (10Gb/s per
lane), FDR10 (10.3125Gb/s per lane), FDR (14.0625Gb/s per lane), EDR (25Gb/s per lane) port,
HDR100 (2 lane x 50Gb/s per lane), HDR (50Gb/s per lane) port
Ethernet: 200GBASE-CR4, 200GBASE-KR4, 200GBASE-SR4, 100GBASE-CR4, 100GBASE-KR4,
100GBASE-SR4, 50GBASE-R2, 50GBASE-R4, 40GBASE-CR4, 40GBASE-KR4, 40GBASE-SR4,
40GBASE-LR4, 40GBASE-ER4, 40GBASE-R2, 25GBASE-R, 20GBASE-KR2, 10GBASE-LR,
10GBASE-ER, 10GBASE-CX4, 10GBASE-CR, 10GBASE-KR, SGMII, 1000BASE-CX, 1000BASE-
KX, 10GBASE-SR
Data Rate
PCI Express Gen3/4:
Adapter Card Voltage: 12V, 3.3VAUX
Power
Power
Typical Power
Maximum Power
Voltage: 3.3Aux
Maximum
Maximum power available through QSFP56 port: 5W
Environmenta Temperature
l
Humidity: 90% relative humidity
a
InfiniBand
Ethernet
SERDES @ 8.0GT/s/16GT/s, x8 lanes (2.0 and 1.1 compatible)
Cable
b Passive Cables
Please refer to
MyMellanox login credentials)
current: 100mA
Operational
Non-operational
c
SDR/DDR/QDR/FDR/EDR/HDR100
1/10/25/40/50/100 Gb/s
11.0W
ConnectX-6 VPI Power Specifications
0°C to 55°C
-40°C to 70°C
(requires
69