Nvidia Mellanox ConnectX-6 MCX654106A-ECAT User Manual page 19

• LED 3 and 4: Reserved for future use.
LED1 and LED2 Link Status Indications (Physical and Logical) - Ethernet Protocole:
LED Color and State
Off
Blinking amber
Solid green
Blinking green
LED1 and LED2 Link Status Indications (Physical and Logical) - InfiniBand Protocole:
LED Color and State
Off
Solid amber
Blinking amber
Solid green
Blinking green
Heat Sink Interface
The heatsink is attached to the ConnectX-6 IC in order to dissipate the heat from the ConnectX-6 IC. It
is attached either by using four spring-loaded push pins that insert into four mounting holes, or by
screws.
ConnectX-6 IC has a thermal shutdown safety mechanism which automatically shuts down the
ConnectX-6 card in cases of high-temperature event, improper thermal coupling or heatsink removal.
For the required airflow (LFM) per OPN, please refer to Specifications.
A link has not been established
1 Hz Blinking amber occurs due to running a beacon command
for locating the adapter card
4 Hz blinking amber indicates a problem with the physical link
Indicates a valid link with no active traffic
Indicates a valid logical link with active traffic
A physical link has not been established
Indicates an active physical link
1 Hz Blinking amber occurs due to running a beacon command
for locating the adapter card
4 Hz blinking amber indicates a problem with the physical link
Indicates a valid logical (data activity) link with no active traffic
Indicates a valid logical link with active traffic
Description
Description
19