Setting the display range (function group RANGE)
5.4 Setting the display range
(function group RANGE)
You need the function group RANGE for the basic set-
ting of the display range. The display range must be ad-
justed to the sound velocity used (function VELOCITY)
and to the probe used (function PROBE DELAY).
– Switch to the first operating level.
– Select the function group RANGE.
USM 36
N o t e
For an exact adjustment of the sound veloci-
ty and the probe delay, please start by read-
ing Chapter 5.8 Calibrating the USM 36,
page 5-28.
Issue 2 (12/2013)
5 Operation
5-9