Analog Output; Horn - GE USM 36 Series Technical Reference And Operating Manual

5 Operation

Analog output

You can output measurement results via analog output
for external further processing. Use the function ANA-
LOG OUTPUT to specify the reading to be output as
voltage signal.
– Switch to the second operating level.
– Select the function group CONFIG2.
– Select the function ANALOG OUTPUT.
– Choose the required reading.
5-78

Horn

Use this function to set an acoustic alarm signal to be
output in addition to the visual alarm of the virtual LED
(see Section LARGE (alarm signal), page 5-64).
– Switch to the second operating level.
– Select the function group CONFIG2.
– Select the function HORN.
– Select the required setting.
Issue 2 (12/2013)
General setup
USM 36