GE USM 36 Series Technical Reference And Operating Manual page 176

5 Operation
As an alternative you can set the offset for each curve
individually and turn off single curves of the multiple
curves. In this case, the adjustment range is –24 ... +24
dB in steps of 0.1 dB.
– Select the function group OFFSETS.
– Select the function OFFSET and set the multiple DAC
curves with a fixed offset.
5-100
– Select the function MODE and press one of the selec-
tor keys to turn on the individual curve definition by
means of CUSTOM. The function OFFSET is dis-
abled.
– Switch to the function group OFFSET2.
– Select the function OFFSET 1 and set the first curve
individually.
– Set the other curve offsets in the same way.
Issue 2 (12/2013)
Distance-amplitude correction (DAC)
USM 36