EcoFlow River 600 Manual page 13

USB-A Overload
Protection
USB-C High Temperature
Protection
USB-C Overload Protection
High Temperature
Recharge-protection
High Temperature
Discharge-protection
Low Temperature
Recharging-protection
Low Temperature
Discharge-protection
Overload
Recharging-protection
Overload
Discharging-protection
Communication Failure
between Main Board and
BMS
Light stays on
USB-A and OVERLOAD icons flash together.
Disconnect all electrical appliances and wait 10
seconds before adding each appliance back.
USB-C and High-Temperature icons flash together.
Let RIVER 600 cool before adding each appliance
back.
The USB-C icon and the OVERLOAD icon flash
together. After unplugging the appliance, it will
automatically resume operation after 10 seconds.
Recharging Time, Exclamation and High-Temperture
icons flash together. This will happen especially when
you charge your device immediately after a heavy
battery use. Let RIVER 600 cool down
before Recharging.
Exclamation and High-temperature icons flash
together. The power supply can be resumed after the
battery is cooled down.
RECHARGING TIME, Exclamation and Low-Temperature
icons flash together. Place RIVER 600 in warmer
place before recharging.
Exclamation and Low-Temperature icons flash
together. Place RIVER 600 in warmer place before
turning Power back on.
RECHARGING TIME, Exclamation and OVERLOAD
icons flash together.
Unplug Charging cables, restart RIVER 600 and plug
back in, If light keeps flashing contact
support@ecoflow.com
Exclamation and Overload icons flash together.
Disconnect all appliances, restart RIVER 600, and add
each appliance back in turn. Please note that electrical
appliances must be operated within rated power.
Only the Exclamation icon is flashing. Restart RIV-
ER 600. If the light keeps flashing, contact
support@ecoflow.com
The Exclamation icon is on. Restart the device. If the
light stays on, contact support@ecoflow.com.
8
Power A Free Life