EcoFlow River 600 Manual page 14

9
Power A Free Life
Communication FaIlure
between Main Board and
AC
Inverter Output Overload
Inverter High Temperature
Protection
Inverter Low Temperture
Protection
Fan Blockage
Car Charger Overload
Car Charger High
Temparature Protection
AC icon Flashes. Restart RIVER 600. If icon keeps
flashing, contact support@ecoflow.com
AC and Overload icons flash together.
Wait 10 seconds, turn AC Power ON/OFF. Please note
that electrical appliances must be operated within
rated power. (For more information about X-Boost
function, go to P12 to see the power limit for appli-
ance use in X-Boost mode. )
AC and High-temperature icons flash together.
Let RIVER 600 cool down. Then turn AC Power On/
OFF the interface will automatically resume operation.
The AC and Low-Temperature icons flash together.
Move RIVER 600 to a warmer place and wait for the
inverter to warm up. Press AC Power ON/OFF button
again. It will automatically recover. If it doesn't,
contact support@ecoflow.com
Fan icon flashes.
Turn Off RIVER 600 and carefully clean and vacuum
around vents on both ends . Turn System Power On. If
icon keeps flashing contact support @ecoflow.com
Car and OVERLOAD icons flash together.
Restart RIVER 600, and make sure that electrical
appliances must be operated within rated power.
Car and High-Temperature icons flash together.
Wait for RIVER 600 to cool down and it will automati-
cally recover.