Turning The Autopilot On / Off; Autopilot Operational Modes - Simrad IS40 Operator's Manual

Turning the autopilot on / off
Engaging the autopilot
At anytime while the autopilot is disengaged press the 'Auto' key to engage
the autopilot. The autopilot will steer the boat on the current selected
course.
Disengaging the autopilot
At any time the autopilot is engaged press the 'STBY' key to disengage the autopilot.
The autopilot will go into Standby mode and you will be required to take manual
control of the helm.
Warning:
autopilot in Non follow up mode!

Autopilot operational modes

Below is a list of autopilot modes that can be initiated via the OP10 Autopilot controller.
Mode
Standby
Auto
Wind
NoDrift
Press
& Hold Navigation
3 sec +
Non Follow Up
Autopilot | IS40 Operator Manual
In Standby mode, pressing any of the directional keys will engage the
Boat Type
Motor Sail
Passive mode used when
manually steering the boat
continues on the heading
Steers the boat to maintain
Steers the boat to a specific
waypoint location, or along
Steer the boat manually
using the OP10 Autopilot
Description
at the helm
Keeps the boat on set
heading
Cancels a turn and
read from the compass
the set wind angle
Steers the vessel on a
straight bearing line by
compensating for drift
a route
controller
Required Input
Heading
Heading, Speed,
Wind Angle
Heading, Position
Heading, Speed,
Position, Waypoint,
Route information
| 35