02: Append Pattern; 03: Split Pattern - Yamaha QY 300 Owner's Manual

02: Append Pattern

•
If the length of the
destination
appended pattern ex-
ceeds 8 measures (the maximum
pattern length), the "Illegal In--
put" error message will appear
and the append operation will
be aborted.
•
This job does not copy voice
or play effect data from the
source style.

03: Split Pattern

88
Appends the specified section of one style to the end of the specified section of
a second style.
The upper
"Style"
which the data is to be copied: "001" ... "100".
The upper
tion of the source style from which the data is to be copied: "Intro", "MainA",
"MainB", "FillAA", "FillBB", "FillAB", "FillBA", "Ending".
The lower
to which the data is to be appended: "001" ... "100".
The lower
section of the destination style to which the data is to be appended: "Intro",
plus "MianA,, "MainB", "Ending" Fills cannot be selected as the destination sec-
tion since they can be only one measure in length.
After setting the parameters as required press
Style job. The metronome icon will appear on the display while the data is
being processed, then "Completed" will appear briefly when the job is done.
Press the [F6] key ("Exit") to return to the job list, or a mode key to go directly
to the selected mode.
Splits a specified section of a specified style into two parts at the specified
measure, and moves the latter half to the specified section of a specified style.
parameter selects the source style — i.e. the style from
parameter selects the source section — i.e. the sec-
"Section"
parameter selects the destination style — i.e. the style
"Style"
parameter selects the destination style — i.e. the
"Section"
to execute the Append
[ENTER]