21: Copy Song; 22: Clear Song - Yamaha QY 300 Owner's Manual

21: Copy Song

22: Clear Song

Copies all data from all tracks of the specified song to any other specified song (includ-
ing song name, play effect, voice assignment, and output assignment settings).
The upper "Song" parameter selects the source song — i.e. the song from
which the data is to be copied: "01" ... "10".
The lower "Song" parameter selects the destination song — i.e. the song
to which the data is to be copied: "01" ... "10".
After setting the parameters as required press [ENTER] to execute the Copy
Song job. The metronome icon will appear on the display while the data is
being processed, then "Completed" will appear briefly when the job is done.
Press the [F6] key ("Exit") to return to the job list, or a mode key to go directly
to the selected mode.
Completely clears all data from all tracks of the currently selected song. Also
initializes the play effect, voice, and output settings.
The "Song" parameter selects the song to be cleared: "01" ... "10".
After setting the parameter as required press [ENTER] to execute the Clear
Song job. The metronome icon will appear on the display while the data is
being processed, then "Completed" will appear briefly when the job is done.
Press the [F6] key ("Exit") to return to the job list, or a mode key to go directly
to the selected mode.
53