05: Clear Pattern; 06: Style Name - Yamaha QY 300 Owner's Manual

05: Clear Pattern

06: Style Name

90
Clears all data from the specified section of the specified style.
The "Style" parameter selects the style in which the specified section is to be
cleared: "001" ... "100".
The parameter selects the section to be cleared: "Intro",
"Section"
"MainA", "MainB", "FillAA", "FillBB", "FillAB", "FillBA", "Ending", or
"All" for all sections.
After setting the parameter as required press
Pattern job. The metronome icon will appear on the display while the data is
being processed, then "Completed" will appear briefly when the job is done.
Press the [F6] key ("Exit") to return to the job list, or a mode key to go directly
to the selected mode.
Allows an original name of up to 8 characters to be assigned to the specified
style.
The style number parameter selects the style for which a name is to be as-
signed: "001" ... "100".
to execute the Clear
[ENTER]