Yamaha QY 300 Owner's Manual page 132

You can use the [F6]
function key ("Exit") to
exit from the disk dis-
play at any time except during
the actual load operation.
122
The first steps in performing any disk operation are to select the save, load,
delete, rename or format operation, and the type of data you want to perform
the operation on (except format, which requires no data type selection).
Use the function keys to select the save, load, delete, rename, or format
operation, then move the cursor to the desired data type (or enter the number
of the desired data type via the numeric keypad).
All song, phrase, user pattern,
All Data
single specified user phrase (001 ... 100).
Phrase A
single specified style (001 ... 100).
Style A
single specified song (01 ... 10).
A
Song
effect, and tempo track data is also saved.
single specified song (01 ... 10) saved in or loaded from
A
Song ESEQ
format. The ESEQ format is used by some sequencers and synthe-
sizers with built-in sequencers. This option provides data compat-
ibility with such devices. The voice, output select,
data is not saved with au ESEQ file. The tempo data is saved.
A single specified song (01 ... 10) saved in or loaded from Stand-
Song SMF
ard MIDI File format. The Standard MIDI File format is widely
used by computer music software, sequencers, and synthesizers
with built-in sequencers. This option provides data compatibility
with such devices. The voice, output select, and play effect data is
not saved with an SMF file. The tempo data is saved.
Once you've selected a disk operation and data type, press the [ENTER] key
to begin the selected operation.
data.
and chain
output select, play
The voice,
and play effect
ESEQ