The Phrase Jobs; 00: Undo/Redo - Yamaha QY 300 Owner's Manual

Yamaha music sequencer owner's manual
Hide thumbs Also See for QY 300:
Table of Contents

Advertisement

The phrase mode includes 15 phrase "jobs" that perform a variety of important functions. To
access and use the phrase jobs, press the
phrase job list. You can select any job on the list simply by moving the cursor to the required
job (use the cursor keys or the data dial) and pressing
down the list in 1-page steps by using the cursor
[SHIFT]
keys. An alternative method is to enter the job's number via the numeric keypad and
[ENTER].
press

00: Undo/Redo

92
[JOB]
key while in the PHRASE mode. This calls the
Returning to the PHRASE Mode
The [F6] function key ("Exit") can be used to exit from any phrase job, and
then from the job list thereby returning you to the phrase mode. You can also
press the [F6] function key ("Exit") while holding one of the
directly return to the PHRASE mode.
This job will "undo" any other phrase job, edit, or record function if it is
executed before any other operation is performed. In all cases the affected data
is restored to the state it was in before performing the job, edit, or record
operation. This job will also undo the last undo operation (redo).
The name of the last operation performed will appear on the display (i.e. the
operation which will be "undone"). In the example display, above, a realtime
record operation will be undone.
[ENTER]. You
can also move up or
and
keys while holding one of the
keys to
[SHIFT]

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents