Yamaha QY 300 Owner's Manual page 87

See "The Pattern Jobs"
on page 86 for details
on the QY300's pattern
jobs which allow considerable
versatility in creating and modi-
fying patterns.
Monitoring the Pattern While Patching
If you press the button while patching you can hear how the pattern
sounds as the various phrases are added. Press the
only the phrase at which the cursor is currently located. Press
time to disengage the solo function. Press
Entering Rests
Press the [F4] key ("Rest") to enter a rest in the measure at which the cursor is
currently located. The rest will stop phrase playback until the end of the
pattern or until the next phrase number is encountered in that track.
Clearing Phrases & Rests
Phrase numbers and rests can be cleared by placing the cursor at the appropri-
ate phrase number or rest and pressing the
Exit From the Patch Mode When Done
Press the [F6] key ("Exit") when the current section of the style is complete.
The mute buttons for tracks which now contain phrases will appear as solid
blocks, and the asterisks will disappear from the pattern name location (use the
"Style Name" job (page 90) to enter an original style name.
Repeat for the Other Sections
Repeat the above procedure to complete the remaining sections of the style, as
required.
key ("Solo") to hear
[F1]
[F1]
to stop playback.
key ("Clear").
[F5]
a second
77