Yamaha QY 300 Owner's Manual page 68

If you move the cursor
to the tempo parameter
(indicated by a note
symbol and a number in the up-
per right corner of the display),
you can use the any data entry
method to set the playback
tempo to anywhere from 25.0 to
300.0 beats per minute. The
number to the right of the deci-
mal point after the tempo value
lets you change the tempo in
1/10th of a beat increments.
58
The currently selected section is shown between square brackets to the right of
the style number and name. You can change styles by playing the cursor at the
section name and using the [-1/NO] and [+1/YES] keys or the data dial. The
newly selected section will begin playing from the top of the next measure.
You can also change sections directly by pressing the appropriate key on the
micro-keyboard while the cursor is located at either the style number or the
section name on the display.
Select Different Styles & Sections
With the cursor positioned over the style number you can use any data entry
method to select different styles, and use the micro-keyboard section keys to
select different sections during playback. In all, cases the newly selected style
or section will begin playing from the top of the next measure.
Stop Playback When Done
Stop playback at any time by pressing the key.