Door Thickness Tolerance Table - Winkhaus blueSmart ETB-IM Operating Manual

Operating manual

5.3 Door thickness tolerance table

Possible door thick-
nesses
Door thickness order
40 mm, 45 mm
50 mm, 55 mm
60 mm, 65 mm
70 mm, 75 mm
80 mm, 85 mm
90 mm, 95 mm
100 mm, 105 mm
110 mm, 115 mm
120 mm, 125 mm
Possible door thick-
nesses
Door thickness order
40 mm, 45 mm
50 mm, 55 mm
60 mm, 65 mm
70 mm, 75 mm
80 mm, 85 mm
90 mm, 95 mm
100 mm, 105 mm >95 – 105 mm
110 mm, 115 mm >105 – 115 mm
120 mm, 125 mm >115 – 125 mm
Aug. Winkhaus GmbH & Co. KG ∙ Hessenweg 9 ∙ 48157 Münster ∙ T +49 251 4908 - 0 ∙ zutrittsorganisation@winkhaus.de ∙ www.winkhaus.de
ETB-IM
If the electronic door handle has to be mounted on a different door, this is
possible within tight tolerances with the screws and square pins provided.
Length of screws electronic handle
(Lock follower area)
>36 – 45 mm
>45 – 55 mm
>55 – 65 mm
>65 – 75 mm
>75 – 85 mm
>85 – 95 mm
>95 – 105 mm
>105 – 115 mm
>115 – 125 mm
Length of
spindle
>36 – 45 mm 70 mm
>45 – 55 mm 80 mm
>55 – 65 mm 90 mm
>65 – 75 mm 100 mm
>75 – 85 mm 110 mm
>85 – 95 mm 120 mm
130 mm
140 mm
150 mm
If a conversion is required outside of this tolerance table, always use
Winkhaus genuine spare parts (spindle and self-locking screws in the
relevant lengths) to maintain the warranty.
8
Length of screws profile cylinder cover
(Countersunk screw)
55 mm (Art. no. 507 136 6)
65 mm (Art. no. 507 136 7)
75 mm (Art. no. 507 136 8)
85 mm (Art. no. 507 136 9)
95 mm (Art. no. 507 137 0)
105 mm (Art. no. 507 137 1)
115 mm (Art. no. 507 137 2)
125 mm (Art. no. 507 137 3)
135 mm (Art. no. 507 137 4)
Spindle ■ 7.0 Spindle ■ 8.0
(Art. no.) (Art. no.)
507 439 3 507 441 6
507 440 8 507 441 7
507 440 9 507 441 8
507 441 0 507 441 9
507 441 1 507 442 0
507 441 2 507 442 1
507 441 3 507 442 2
507 441 4 507 442 3
507 441 5 507 442 4
35 mm (Art. no. 507 136 4)
45 mm (Art. no. 507 136 5)
55 mm (Art. no. 507 136 6)
65 mm (Art. no. 507 136 7)
75 mm (Art. no. 507 136 8)
85 mm (Art. no. 507 136 9)
95 mm (Art. no. 507 137 0)
105 mm (Art. no. 507 137 1)
115 mm (Art. no. 507 137 2)
Spindle ■ 8.5 Spindle ■ 9.0
(Art. no.) (Art. no.)
507 442 5 507 443 5
507 442 6 507 443 6
507 442 8 507 443 7
507 442 9 507 443 8
507 443 0 507 443 9
507 443 1 507 444 0
507 443 2 507 444 1
507 443 3 507 444 2
507 443 4 507 444 3