Disassembly - Winkhaus blueSmart ETB-IM Operating Manual

Operating manual

14 Disassembly

Step 1
Step 2
Step 3
Step 4
Step 5
Aug. Winkhaus GmbH & Co. KG ∙ Hessenweg 9 ∙ 48157 Münster ∙ T +49 251 4908 - 0 ∙ zutrittsorganisation@winkhaus.de ∙ www.winkhaus.de
ETB-IM
If the product is not faulty: Revoke access authorisations via blueControl
management software.
Step 1: Loosen the cover rosette carefully with a cover lifter.
Step 2: Loosen the grub screw of the handle on the exterior side.
Step 3: Loosen the door handle using circlip pliers form B in accordance
with DIN 5254.
Step 4: Loosen and unscrew the screws with screwdriver PH 1.
Step 5: Pull off the base rosette on B-side over the spindle.
Step 6: If the door fitting is also screwed in the door sash from the A-side,
remove the screws from the door sash. To do this, loosen the cover
beforehand (see 11.2 Replacing the battery).
25
Warning!
Without gloves, the risk of slipping and injuries cannot
be ruled out. Wear gloves and protective goggles.
Note!
To avoid damage to the door sash we recommend us-
ing a rosette lifter and a protective plate (not included
in delivery).
Note!
Screws are stiff due to the self-locking feature.