Operating manual
5
Assembly preparation
5.1 Definition of terms
Spindle dimension
Backset
1
Lock follower
2
Latch
3
Deadbolt
5.2 Tools
Aug. Winkhaus GmbH & Co. KG ∙ Hessenweg 9 ∙ 48157 Münster ∙ T +49 251 4908 - 0 ∙ zutrittsorganisation@winkhaus.de ∙ www.winkhaus.de
ETB-IM
1
38
4
Face plate screw
5
Faceplate
6
Cylinder
The tools shown in the figure on the left are required for assembly:
• Screwdriver PH1 (magnetized where applicable).
• Screwdriver PH2.
• Allen key size 3.
• Where applicable: Electric drill and borer.
• Drill template for door fittings, the drill template from the Quick Installation
Guide may be used as an alternative if the dimensions are suitable.
The following are also required for disassembling the existing door fitting
(see 14 Disassembly) (optionally available):
• Cover lifter (Art. no. 492 935 3).
• Circlip pliers form B in accordance with DIN 5254 (Art. no. 507 446 0).
In order to avoid damage to the electronic door handle, the door and the
lock during assembly, only screws and spindles suitable for the door sash
thickness included in delivery may be used.
7
5
2
7
3
4
7
Drill hole for the fitting
6