Starting The Recorder; Push Button Start; Push Button Start With Start Delay; Automatic Date/Time Start - LogTag Recorders TRED30-16R Product User Manual

Starting the Recorder

Push button start

The recorder must be in
READY
Current time and the
READY
Press and hold the START
/CLEAR/STOP
is shown in addition to
READY
Then disappears:
READY
Once disappears, release the button within two seconds.
READY
will also disappear, and the
STARTING
The TRED30-16R now records temperature data.
The recorder will not start if you...
... release the button before
READY
... keep holding the button for more than 2 seconds after
disappears.
Page 9 of 16
mode for it to be started.
symbol are shown.
button. First,
STARTING
:
symbol will be shown.
disappears
READY

Push Button Start with Start Delay

If the recorder has been configured for push button start with a start
delay, the word is shown instead of the
DELAY
The delay time is shown in hours and minutes.
The time counts down and the TRED30-16R starts recording when it
reaches 0:00.
If a user presses the
START
delay phase, the start delay value is reset to its originally configured
value.

Automatic date/time start

If you configured the TRED30-16R for a date/time start, it will start
recording temperature values as soon as the entered start time is
reached.
The recorder will display the following if a Date/Time Start has been
chosen:
Hibernating the recorder using LogTag
Date/Time start function.
TRED30-16R Product User Guide, Revision 1.3, copyright © 2004-2016,
symbol.
button during the start
/CLEAR/STOP
®
Analyzer will disable the
®
LogTag Recorders . All rights reserved.