Reviewing Day Statistics On The Tred30-16R - LogTag Recorders TRED30-16R Product User Manual

Reviewing Day Statistics on the
TRED30-16R
The review of day statistics history is accessed by pressing the
button
REVIEW
/MARK
You can review the data regardless of whether the recorder is still
logging data, or has already been stopped.
Following are some sample display screens you might see during a
statistics review. All display screens are based on the alarm settings
made in Alarm Configuration Options
Today' s data
Pressing the button displays the current day's maximum statistic:
The Today marker flashes and 00
l
that today's data are being displayed.
Today, no temperature values were recorded above the upper alarm
l
threshold, and no alarm event was generated ( ).
The maximum temperature recorded today was 4.8°C.
l
The paused function is enabled
l
Pressing the button again displays the current day's minimum
statistic:
still flashes and 00
DAYS
l
data (today) is being displayed.
Today, no temperature values were recorded below the lower alarm
l
threshold, and no alarm event was generated.
The minimum temperature recorded today was 1.4°C.
l
Yesterday' s data
Pressing the button now displays yesterday's maximum statistic:
Page 12 of 16
.
on page 5:
is shown to indicate
DAYS
is still shown, as the same day's
The -1 marker flashes and -01
l
yesterday's data is being displayed.
Yesterday, recordings above the upper threshold were recorded,
l
indicated by the upper alarm threshold marker
the duration value shows the amount of time recorded above the
l
limit yesterday, which was 12 hours 30 minutes
an alarm was triggered, indicated by the
l
longer than the allowed time above the threshold
The maximum temperature recorded yesterday was 12.9°C.
l
Pressing the button now displays yesterday's minimum statistic:
still flashes and -01
l
at yesterday's data.
Yesterday, no temperature values were recorded below the lower
l
alarm threshold. The alarm for the day
upper alarm, not by the lower alarm, so a
minimum statistics.
The minimum temperature recorded yesterday was 2.0°C.
l
Data from the day before yesterday
Pressing the button now displays the maximum statistic from two
days ago:
The flashes and -02
l
being displayed is from two days ago.
Two days ago recordings above the upper threshold were recorded,
l
indicated by the upper alarm threshold marker
The duration was 1 hour 20 minutes, which was shorter than the
l
allowed period, so no alarm event was generated
The maximum temperature recorded on the day before yesterday
l
was 11.5°C.
Pressing the button now displays the minimum statistic from two
days ago:
TRED30-16R Product User Guide, Revision 1.3, copyright © 2004-2016,
is shown to indicate that
DAYS
, as this duration was
still shows, as we are still looking
DAYS
was generated by the
is displayed in the
is shown to indicate that the data
DAYS
®
LogTag Recorders . All rights reserved.