Introduction - Siemens Moore 353 User Manual

UM353-1

1.0 INTRODUCTION

This User's Manual contains configuration, installation and service information for
the Moore 353 Process Automation Controller. It is divided into fifteen sections.
•
Section 1, Introduction, has general information about the organization of this
manual, the controller, product support, and the contents of a typical shipment.
•
Section 2, Configuration Overview, contains a list of the functions blocks
available for use in configuring the controller and a procedure for
configuration. Function block availability depends on controller model and
MPU Controller board firmware version.
•
Section 3, Function Blocks, contains a detailed description of each function
block.
•
Section 4, Factory Configured Options, provides a graphical presentation of the function blocks used in FCOs
and a listing of changes made to default function block parameters.
•
Section 5, LonWorks Communications, provides an overview of LonWorks® communication.
•
Section 6, Network Communications, furnishes overviews of Modbus, LIL, and Ethernet communication data.
•
Section 7, Data Mapping, contains network data details for Modbus, Local Instrument Link (LIL), and
Ethernet.
•
Section 8, Installation, contains drawings and steps detailing mechanical and electrical installation. Electrical
connections to the controller are identified and numerous wiring diagrams are included.
•
Section 9, Local Faceplate Operation, describes and illustrates the Display Assembly's operator controls and
displays. Use of these for on-line operation, for configurations and for autotuning is described.
•
Section 10, Controller and System Test, has procedures for testing the controller and the installation.
•
Section 11, Maintenance, lists the tools and test equipment to service a controller. It also has preventive
maintenance and servicing procedures, including error codes. Assembly replacement steps are included as are
detailed jumper selection criteria and jumper setting steps.
•
Section 12, Calibration, provides step-by-step procedures for calibration of analog input and output circuits.
•
Section 13, Circuit Description, furnishes a block diagram level description of the controller's circuits.
•
Section 14, Model Designation and Specifications, shows controller model numbers; a list of accessories;
mechanical, electrical, and environmental specifications; and a list of current agency approvals.
•
Section 15, Abbreviations and Acronyms, is a convenient reference for new users that explains many
abbreviations and acronyms appearing in this manual.
Save this User's Manual. It should be available to those installing, configuring,
operating, and servicing the controller.
March 2003
IMPORTANT
Introduction
1-1