Introduction - Nußbaum Hebetechnik 4.40H Instructions And Documentation

1 . I n t ro d u c t i o n
The document "Operating Instructions and Documentation" contains important
infomation about installation, operation and maintenance of the 4.40 H .
To furnish proof of installation of the automotive lift the form "Record of Installation"
must be signedand returned to the manufacturer.
To furnish proof of the singular, felt this documentation contains forms. The forms should
be used to document the checks. They should not beremoved from this documentation.
Every Changes to the construction and d i s p l a c e m e n t of the automotive lift must be
registered in the "Master document" of the lift.
Installation and check of the automotive lift
Only specialist staff is allowed to do work concerning safety and to do the safety checks
of the lift. They are called experts and competent person in this document.
E x p e rt s are persons (for example self-employed engineers, experts) which have
received instruction and have experience to check and to test automotive lifts.
They know the relevant labour and accidents prevention regulations.
Competent person are persons who have acquired adequate knowledge and
experience with automotive lifts. They took part in training from the lift-
manufacturer (servicing technicians of the manufacturer or dealer, are
Competents)
Information of Warning
To show d a n g e r and to show important information the three symbols below are used.
Pay attention to those passages, which are marked with these symbols
D a n g e r !
This sign indicates danger to life. Inexpert handling of the descriped
operationmay be dangerous to life.
C a u t i o n !
This sign cautions against possible damage to the automotive lift or other
material defects in case of inexpert handling .
A t t e n t i o n !
This sign indicates for an important function or other important notes.
Instruction and Documentation
4.40 H
7