Nußbaum Hebetechnik 4.40H Instructions And Documentation page 4

Organising requirements
- The instructions for use are constantly to be kept at the place of operation being at hand at
any time.
- In addition to the instructions for use rules pertaining to other regulations i.e. accident
prevention and environmental rules are to be observed and directed.
- Safety- and dangeralert operation of personal is occasionally and by observing the
instructions for use to be controlled.
- As far as required and ordered by regulations personal protective equipment is to be used
- All safety- and danger-hints at the lift are to be observed!
- Spare parts must comply with technical requirements laid down by the manufacturer.
This is only warranted with original parts.
- Consider time intervals given or fixed in instructions for use for repeated tests/inspections.
Maintenanceworks, remedy of faults and disposal
- Fixed Adjusting-, maintenance- and inspectionworks and time intervals including details
for exchange of parts/part components as mentioned in the instructions for use are to be
adhered.
These works must only be carried out by expert personal.
- After maintenance- and repair works loose screw connections must always be firmly
tightend!
Instruction and Documentation
4.40 H
4