Technical Information - Nußbaum Hebetechnik 4.40H Instructions And Documentation

3 . Technical information

Technical datas:
Lifting capacity:
Load distribution:
Lifting time automotive lift:
Lowering time automotive lift:
height of lifting (automotive lift):
Line voltage:
driving voltage:
Power rating:
Motor speed:
Output oil pump:
Hydraulic pressure:
Responsing pressure of the
pressure relief valve:
Hold-up oil-tank:
sound level (measured at operating panel)
Safety devices
1. ratchets
safety device of the load against unintentional lowering in case of leck hydraulic
sastem
2. safety switch
If the rope tears the lift switched off.
3 . pressure relief valve
Overpring-safety of the hydraulic system
4 . C E - S TO P
The automotive lift stops automatically 200 mm before the lowest position.
5. Roll-off safety at the runways
Safety device of the vehicle against falling down
Instruction and Documentation
4000 kg
max. 2:1 in or against
drive-on direction
app. 30 sec
app. 25 sec
1955 mm
400 V three phase current
24 Volt
3,0 KW
2800 revolution/minute
3 ccm/revolution
240 - 250bar
275 bar
app. 10 litre
≤ 75 dBA
1 0
4.40 H