Connect The Operating Unit - Nußbaum Hebetechnik 4.40H Instructions And Documentation

Connect the operating unit

Instruction and Documentation
4.40 H
operating unit
1 key switch
2 press button for the soft lowering in
the ratchet.
The control unit is not connected by the
delivery.
Open the control unit.
The 7-conductor bunch is comming from the
rail. Put the cable into the bolt connection at
the top of the control unit.
pic: the control unit is open
Every lead of a cable has a Number on the
side. Put the cable in the numberated part
and fasten the cable.
The lead Nr. 6 and Nr.7 are out of function.
pic : the control unit is open
Put the cable Nr.5 in the electric unit Nr. 5 and
fasten the cable.
2 7