Using Memory Protection To Prevent Accidental Deletion - Yamaha SU200 Owner's Manual

C
Select the pad that you wish to adjust.
V
Press [+1/YES] or [-/NO] or turn knob 1 to adjust the pad's volume setting.
–1/NO + 1/YES
BPM
B
Press the [JOB] button to escape from Job mode.

Using Memory Protection to Prevent Accidental Deletion

You can use the Memory Protect feature to protect against accidental erasure of samples and set-
tings currently stored in the SU200 memory. If protection is switched on, the SU200 will not allow the
content of memory to be changed.
CAUTION
• If you wish to retain the samples that came preinstalled on your SU200, please save them into a
memory card.
Z
Switch off all pads, and then press the [JOB] button to enter Job mode.
• You can escape from Job mode by pressing the [JOB] button once again.
NOTE
X
Press the [AUDIO IN] button.
C
Use [+1/YES}, [-1/NO], or knob 1 to toggle memory protection on and off.
While protection is on, the SU200 will refuse to carry out sample recording, resampling, deletion,
extraction, time stretch, copying, and loading. You are still free to make changes to the playback set-
tings (loop settings, pad volumes, and so on), but any changes that you make will be lost at power-off.
–1/NO + 1/YES
BPM
V
Press the [JOB] button to escape from Job mode.
BANK
DATA REC TRGLVL
or
EFFECT
1 2
CONTROL
DATA REC TRGLVL
or
EFFECT
1 2
CONTROL
BANK BANK
PadVol
57
Prtct
on
Prtct
off
Chapter 7 Other Useful Features
51