Yamaha SU200 Owner's Manual page 10

Rear Panel and Connections
STANDBY
ON
q
External Sequencer
(RM1x, etc.)
q
STANDBY/ON Switch................................................................................................................................. Page 13
Press to toggle the power on or off. (Power is on when the switch is pressed in.)
w
DC IN Power Input
Connects to the optional PA-3B power adaptor.
e
MIDI IN Connector ...................................................................................................................................... Page 38
Connects to external MIDI device (electronic instrument or computer). Allows you to control SU200 opera-
tion from the external device.
r
Card Slot....................................................................................................................................................... Page 40
Accepts insertion of a memory card. You use memory cards to save and load samples.
t
STEREO OUTPUT Jacks (R, L)
The SU200's audio outputs. As the SU200 does not include an internal amp or speakers, you need to connect
these outputs to an external audio device in order to play out the sound.
y
LINE INPUT Jacks (R, L)
Inputs an audio signal for sampling or for AUDIO IN throughput. Connects to output cables from an external
device such as a CD player or mixer.
u
MIC INPUT Jack
Connects to a dynamic microphone or a battery-powered condenser microphone.
i
PHONES Jack
Connects to a headphone set. (Use the VOLUME knob to control the volume to the headphones.)
CAUTION
• Don't leave the headphone volume set too high. Prolonged listening at high volume may
cause ear damage.
10
Controls, Connectors, and the LCD
DC IN MIDI IN
3.3V
CARD
w e r
STEREO OUTPUT LINE INPUT
R L R L
t y
CD
MIC INPUT PHONES
u i
MD