Saving Data Into A Memory Card - Yamaha SU200 Owner's Manual

You can use memory cards to save and load sample data. You control memory-card operations
using the SU200's Job mode.
3.3V

Saving Data into a Memory Card

The SU200 offers the following two methods for saving sample data into a memory card.
Volume Save: Save all data from all SU200 samples into the card.
Wave Export: Save a selected sample into the card as a WAV file.
The "volume save" will save all samples together with all related settings.
• These operations do not save settings related to the EFFECT CONTROL knobs and ribbon control-
NOTE
ler.
• If the memory card does not have enough free space to hold the save, the SU200 displays an error
message (see page 52) and cancels the save operation. If you wish to proceed, you must use a dif-
ferent card or delete one or more files from the current card.
• The term volume refers to the entire set of SU200 sample data: all samples (waveform data
together with settings) for all pads.
• Before you can save data into a new memory card, you must format the card. (See page 47.)
Z
Insert a memory card into the card slot.
X
Switch off all pads, and then press the [JOB] button to enter Job mode.
• You can escape from Job mode by pressing the [JOB] button once again.
NOTE
42
Chapter 6 Using Memory Cards
CARD
3.3V
CARD
JOB
JOB
SAVE LOAD D E L E T E
C A R D