Yamaha SU200 Owner's Manual page 27

V
Start resampling.
Begin pad play by pressing any pad other than the one you selected at Step 2. Resampling
starts as soon as you press a pad.
You can now play any combination of pads, you can switch on appropriate effects, and you can use the
ribbon controller and the EFFECT CONTROL knobs.
• The TIME effect does not operate during resampling.
NOTE
You can also use the [LOOP TR PLAY] button to start loop-track playback. This playback will
also be recorded into the new sample.
B
When you have finished resampling, press the [START/STOP] button to stop.
• Resampling automatically stops if you run out o f recording time (if the remaining-time
NOTE
display falls to 00_00_0).
N
Listen to the results by pressing the pad that you selected at Step 2 above.
DATA REC TRGLVL
EFFECT
1 2
CONTROL
LOOP TR
PLAY
START
STOP
Chapter 1 Recording Samples
27