Specifications - Yamaha SU200 Owner's Manual

Specifications
1. Main Specifications
Maximum polyphony
Maximum number of samples
Sampling modes
Effects
Loop-Track Play
Interfaces
2. Memory
Wave memory
3. Display
LCD
4. Controllers
Volume, EFFECT CONTROL knobs 1 and 2, Ribbon controller
5. Connectors
MIDI IN, PHONES (stereo mini jack), LINE OUT L/R (standard jacks), LINE IN L/R (standard jacks), MIC
IN (monaural standard jack), DC IN
6. Power
Six 1.5v AA size (R6P or SUM-3).
AC adaptor (PA-3B)
7. External Dimensions
257(W) 210(D) 62(H)
8. Weight
830g
9. Included Accessories
Owner's manual (this manual)
Sampling CD
6 samples (monaural)
24
Select from 4 sampling frequencies: 44.1, 22.05, 11.025, or 5.5125
kHz. Select STEREO or MONO.
Loop Remix; Slice; Low-pass filter with resonance; distortion/lo-fi
(distortion with lo-pass filter); Delay; Tech Mod; Scratch; Time
Press one button to play all loop samples at same BPM (even if
recorded at differing BPMs); control mutes and effects in real time.
LINE INPUT accepts input from CD player, MD player, etc.
MIC INPUT accepts input from dynamic microphone or powered
condenser microphone.
(LINE/MIC switching is automatic, based on detection of MIC inser-
tion/removal.)
Memory-card (smart media) slot.
MIDI IN can be used to control pad play from external keyboard.
896 KB.
Stores about 333 seconds of monaural sound at 5.512-kHz sampling
rate; about 42 seconds at 44.1-kHz sampling rate. (For stereo sound,
stores half the above indicated times.)
Backlit custom LCD
[mm]
55
Reference