Yamaha SU200 Owner's Manual page 25

M
Input the sound you are recording (through the microphone or from the device con-
nected to the LINE INPUT).
<
When you have finished recording, press the [START/STOP] button to stop. The
SU200 returns to Pad-Play mode.
• Sampling automatically stops if you run out of recording time (if the remaining-time display
NOTE
falls to 00_00_0).
>
Listen to the results by pressing the pad that you selected at Step 3 above.
• If pads recorded at different grades are played together, the pad(s) recorded at lower grades
NOTE
may sound noticeably "noisy." You can avoid this problem by recording all samples at the
same grade.
• If you notice noise at the start or end of the sample during playback, adjust the start point
and/or end point to a less noisy location.
or
"ABCDE"
START
STOP
PLAY
Chapter 1 Recording Samples
25