Yamaha SU200 Owner's Manual page 31

X
Press the [START POINT] button, and then adjust the start point.
START
POINT
+
–1/NO 1/YES
BPM
C
Press the [END POINT] button, and then adjust the end point.
START
POINT
–1/NO + 1/YES
BPM
NOTE • The start point and end point can be adjusted during sample playback.
V
Press the [EXIT] button.
The SU200 stores the settings and returns to Pad-Play mode.
Clearing the Start or End Point
Z
Press the pad that you want to work on.
X
To clear the start-point setting: Hold down
the [POINT CLEAR] button and press the
[START POINT] button.
C
To clear the end-point setting: Hold down
the [POINT CLEAR] button and press the [END
POINT] button].
V
Press the [EXIT] button.
The SU200 clears the setting(s) and returns to Pad-
Play mode
• You can restore the previous start and end points by
NOTE
pressing the [EXIT] button while holding down the
[HOLD] button.
END POINT
When you press [START POINT], the display shows the sample's
POINT CLEAR
current start-point setting (StPnt). Adjust to the desired start point by
pressing [-1/NO] or [+1/YES] or by turning knob 1.
DATA REC TRGLVL
or
EFFECT
1
CONTROL
END POINT
When you press [END POINT], the display shows the sample's cur-
POINT CLEAR
rent end-point setting (EdPnt). Adjust to the desired end point by
pressing [-1/NO] or [+1/YES] or by turning knob 1.
DATA REC TRGLVL
or
EFFECT
1
CONTROL
bpm120
StPnt
2
bpm120
EdPnt
2
EXIT
START
POINT
START
POINT
1812
15125
END POINT
POINT CLEAR
END POINT
POINT CLEAR
EXIT
Chapter 2 Playing the Pads
31