Setting Up; Installing The Accessories; Music Rest; Pedal - Yamaha P-250 Owner's Manual

Setting Up

Installing the Accessories

Music rest

To attach the music rest, insert its pins into the holes on
the P-250's rear panel, as shown in the diagram below.

Pedal

Connect the included pedal (FC3) to the [1(SUS-
TAIN)], [2(SOSTENUTO)], or [3(SOFT)] jack on the
rear panel. In most situations, you will likely connect
the pedal to the [1(SUSTAIN)] jack for use as a sustain
pedal (page 23).

Before Powering Up

1
Make sure the [POWER] switch is OFF.
2
Plug the appropriate end of the included
power cable into the [AC INLET].
AC INLET
LCD control buttons

[MASTER VOLUME]

SONG SELECT
SONG KEYBOARD
NEW SONG
MIN MAX SONG BALANCE
MASTER VOLUME
16
P-250
LCD
TRACK1 TRACK2 EX.TRACKS SONG FILE MIDI OUT PANEL LOCK A
TOP START/STOP REC
SONG SETTING DOWN UP
SYNCHRO START C
SONG TEMPO
3
Plug the other end of the power cable into an
AC outlet.

Powering Up

1
Turn the power ON by pressing the [POWER]
switch.
2
Rotate the [CONTRAST] knob to adjust the
brightness of the LCD.
3
Adjust the [MASTER VOLUME] control to a com-
fortable listening level while playing the key-
board or playing back the demonstration songs.
LCD and LCD control buttons
You can use the LCD control buttons (A, B, C, and D)
to select and set the items displayed on the LCD. Ver-
ify the operation by checking the LCD. When you
press the [EXIT] button, the unit displays the initial
power-on screen.
LCD control buttons
[CONTRAST]
B CONTRAST G.PIANO 1 G.PIANO 2 E.PIANO1 E.PIANO2 E.PIANO3
NO YES 1 2 3 4
ORGAN 1 ORGAN 2 STRINGS CHOIR SYNTH.PAD
EXIT
D 9 10 11 12
VOICE/PERFORMANCE
[EXIT]
POWER
ON OFF
CLAVI. HARPSI. VIBES VOICE EDIT SPLIT REVERB CHORUS PERFORMANCE MIDI SETTING
5 6 7 8
VARIATION MASTER EQ EDIT PERFORM. FILE OTHER SETTING
GUITAR BASS XG
13 14 15 16 A B