Yamaha QY70 Owner's Manual page 236

MIDI
MIDI Data Error
Now Running
MIDI Buffer Full
XG Data Error
XG Adrs Error
XG Size Error
Checksum Error
Host is OffLine
Messages other than error messages
Can't Undo OK? (Yes/No) If executing a job would fill up the internal memory so
Are You Sure? (Yes/No)
Completed
Executing...
Transmitting...
Receiving...
234
A p p e n d i x
This will appear when the received QY bulk data contains
an error.
This will appear when the QY70 is receiving bulk data.
Other MIDI signals cannot be received at this time.
This will appear when the MIDI reception buffer of the
QY70 has filled up, and processing was not possible. Try
decreasing the amount of data or increasing the interval
time and transmit the data once again.
This appears when the received XG parameter change
contains a data size error
This appears when the received XG data contains an
address error.
This appears when the received XG bulk data contains a
data size error.
This appears when the received XG data contains a
Checksum error.
If the QY70 is connected to a computer, this appears
when the computer's power is switched OFF. Switch the
computer's power ON.
that Undo will not be available, this message will appear.
If you are sure that you will not need to Undo this job,
press "YES". To cancel without executing the job, press
"NO".
Before an operation is executed, this message will ask
you for confirmation. To execute the operation press
"YES". To cancel the operation press "NO".
This will appear when the current process has been
completed.
This message will appear while the job is being executed.
Please wait.
When transmitting MIDI bulk data, this message will
appear.
When receiving MIDI bulk data, this message will appear.