Yamaha QY70 Owner's Manual page 209

E d i t i n g
V Enter the Specified Event
Press the [ENTER] key to enter the event as specified.
B Return to the Change Edit Mode
Press the [EXIT] key to return to the change edit display,
and continue editing as required.
N Exit From the Edit Mode
Press the [SONG] or [PATT] key to exit from the EDIT
mode and return to the normal SONG or PATTERN play mode.
The [EXIT] key will also return you to the SONG or PATTERN
mode from the EDIT mode.
NOTE
• If you insert Control Change data other than Modulation (#1), Expres-
sion (#11), Harmonic Content (#71) and Brightness (#74) in the user
pattern, these data will not be reset even if the pattern is changed, and
will take effect on the newly selected pattern.
To avoid this, remember to enter the value to reset at the end of the
phrase when you insert these control change data.
S o n g s & P a t t e r n s



Pitch bend event
inserted. once
 
inserted, you can edit
the event's location
and value in the
change edit mode.
12
207