Yamaha QY70 Owner's Manual page 61

E a s y
NOTE
• You can add bass notes to existing chords without having to re-enter
the entire chord by simply moving the cursor to the chord and using the
[OCT DOWN/BASS] key to specify the bass note. A bass note can be
removed from a chord by placing the cursor at the chord and re-
entering the chord.
If FNGR is set to "ON", a bass note can be entered by
pressing a key for a bass note on the left part of the micro
keyboard or an external keyboard while holding the chord. (The
"left part" range for entering a bass note can be specified in the
Utility mode on page 227.)
Syncopated Chords
Chords can be syncopated (i.e. the chord actually begins an
eighth or sixteenth note before the beat on which it is entered)
by using the [OCT UP] key (note the " " marking above the
key). Enter the chord, then press the [OCT UP] key once for
eigth-note syncopation, or twice for sixteenth-note syncopation
(the appropriate syncopation symbol will appear below the chord
name).
Example: D chord syncopated (8th note)
A c c o m p a n i m e n t



 
5
59