Yamaha QY70 Owner's Manual page 62

display can be used to erase the chord at which the cursor is
located.
If you don't want to hear the sound, press the [MENU] key and
then the function key next to "Sound" to call the Sound on/off
display.
turn on.
60
E a s y
NOTE
• You can add syncopation to existing chords without having to re-enter
the entire chord by simply moving the cursor to the chord and pressing
the [OCT UP] key. Syncopation can be removed from a chord by placing
the cursor at the chord and pressing the [OCT UP] once or twice so that
the syncopation symbol disappears.
Erasing Chords
The function key immediately to the right of "ers" on the
Sound On/Off
You can hear the sound of entered chord in step recording.
Press [-1/NO] key to turn the sound off, [+1/YES] key to
A c c o m p a n i m e n t
Press to erase chord
at cursor location.