Clear Track - Yamaha QY70 Owner's Manual

Completely clears the specifed track in the specified section.
The "Section" parameter specifies the section to be cleared:
"Intro", "MainA", "MainB", "FillAB", "FillBA", "Ending".
The "TR" parameter selects the track to be cleared: D1, D2, PC, BA,
C1, C2, C3, C4.
The "Event", "Play Effect", and "Voice" check boxes make it
possible to specify whether or not the corresponding types of data will be
cleared or not (the data is cleared when the checkbox is checked).
After setting the parameters as required press [ENTER] to execute
the Clear Track job. The metronome icon will appear on the display while
the data is being processed, then "Completed" will appear briefly when
the job is done. Press the [EXIT] key to return to the job list, or a mode key
to go directly to the selected mode.
188
T h e P a t t e r n

20 : Clear Track

J o b s