Yamaha QY70 Owner's Manual page 23

P o w e r
N Type in the name of the floppy disk drive where the floppy
disk is inserted, and the name of the directory containing the
driver.
For example, if you inserted the disk in drive A of
an IBM-PC/AT series computer, you should type as
follows:
A:\IBMPC
If you inserted the disk in drive B of an NEC PC-
9801/9821 series, you should type as follows:
B:\NECPC98
Click "OK".
The "Add Unlisted or Updated Driver" dialog box will
appear.
M With the "Yamaha CBXT3 Serial Driver" highlighted, click
"OK".
The "Yamaha CBX-T3 Serial Driver Setup" dialog box will
appear.
< Click the desired COM port to select it, then click "OK".
The System Setup dialog box will appear.
> Click "Restart" to make the added driver effective.
This completes installation of the MIDI driver.
Remember to set the Host Select switch to PC-2 when
you connect your QY70 to an IBM-PC/AT series, or PC-1 when
you connect to an NEC PC-9801/9821 series.
& C o n n e c t i o n s



 
2
21