Yamaha QY70 Owner's Manual page 142

C r e a t i n g
C Select a Pattern Track
PATTERN mode. The PATTERN mode tracks and the phrases that
can be assigned to each track are listed below:
want to assign a phrase to.
V Enter the Required Phrase Number
number parameter, then use the [-1] and [+1] keys or the SHIFT-
Number entry method to select the desired phrase for that track.
140
O r i g i n a l
NOTE
• The default pattern length for the INTRO, MAIN A, MAIN B, and
ENDING sections is 2 measures, while the default length for the FILL
AB and FILLBA sections is 1 measure.
Phrases can be assigned to any of 8 "tracks" in the
Track Part
D1 Drum 1
D2 Drum 2
PC Percussion
BA Bass
C1 Chord 1
C2 Chord 2
C3 Chord 3
C4 Chord 4
NOTE
• For details on the available phrases, refer to the Preset Phrase List.
Move the cursor to the phrase-entry area of the track you
Use the cursor keys to move to the category, beat, or
A c c o m p a n i m e n t
Available Phrases
Drums Phrase
Drums Phrase
Percussion Phrase
Bass Phrase
Chord backing phrase (Guitar, Keyboard, etc.)
Chord backing phrase (Guitar, Keyboard, etc.)
Chord backing phrase (Guitar, Keyboard, etc.)
Chord backing phrase (Guitar, Keyboard, etc.)
P a t t e r n s
Cursor at D1 track