12.7 Fishfinder waypoints
Placing a waypoint on the fishfinder display enables you to mark a
position that you can return to later.
When a waypoint is placed, its details are added to the waypoint list
and a vertical line labelled WPT is displayed on screen. You can edit
waypoints and navigate to them in the fishfinder window.
Placing a Waypoint on the Fishfinder Display
With the fishfinder screen active:
1. Press the WPTS/MOB button.
2. Select the appropriate option: WAYPOINT AT CURSOR ,
WAYPOINT AT VESSEL, or WAYPOINT AT LAT/LON.
Using the fishfinder
12.8 Fishfinder alarms
The display can be configured to provide a number of fishfinder
alarms.
The following fishfinder alarms can be set when you are connected
to a DSM, or when the simulator is on:
• Fish alarms sound when a target meets the specified sensitivity
level and, is within the depth limits (if enabled). The greater the
fish alarm sensitivity, the greater the number of target image
depths displayed.
• Shallow/Deep alarms sound when the DSM detects that the
depth is less than the shallow limit, or greater than the deep limit.
Setting up fishfinder alarms
Fishfinder alarms are configured within the alarms set up menu.
1. Press the MENU button.
2. Select the Alarm Setup menu item.
3. Select Fishfinder Alarms Setup .
4. Use the menu items to make the required changes.
5. Press the OK button to save the changes.
183