Video Application Overview - Raymarine E Series User Reference Handbook

18.1 Video application overview

You can view a video or camera source on your multifunction display.
The video application enables you to connect a video source directly
to your multifunction display, and view the video on the screen.
With the optional audio / video cable accessory, you can connect up
to 4 video sources to your multifunction display.
Although you can only view one video source at any one time,
you can set up your multifunction display to cycle through up to 4
different video sources (for example, one video source every 10
seconds).
You can also adjust the brightness, contrast, color, and aspect ratio
of each video source.
The following image shows an example of a camera feed displayed
in the video application:
226
You can also output anything displayed on your multifunction display
to an external display. The output resolution can be adjusted in the
MENU > Display Setup Menu.
Note: You can only view the video on the multifunction display
that the video source is directly connected to. You cannot view
the video on any additional networked displays.
Note: For information on connecting the video source, compatible
input configurations, and the optional audio / video cable
accessory, refer to the Installation Guide.
E-Series Widescreen User reference