Fuse List; Fuses Location Diagram; Fused Detailed - LAI Games Slam 'n' Jam Overhead Display Manual

FUSE LIST

FUSES LOCATION DIAGRAM

MCU PCB OUTPUT
FUSE 4 AMP
FAST BLOW
ROPE LIGHT CHASER
PCB FUSE 3 AMP
FAST BLOW
FUSES DETAILED
!" MCU CONTROLLER (GAME PCB) FUSE (1 x 1 AMP Fast Blow).
This fuse is for the supply to the MCU PCB. The MCU PCB also supplies the
power to the sound PCB.
!" MCU CONTROLLER (GAME PCB) OUTPUT FUSE (1 x 4 AMP Fast
Blow).
This fuse is for the controlled outputs from the MCU controller like meters etc.
!" LIGHTING FUSE (1 x 3 AMP Slow Blow).
This fuse is for protection of the 220 Volt output from the Lighting Transformer.
!" ROPE LIGHT CHASER PCB FUSE (1 x 3 AMP Fast Blow).
This fuse is for the decorative Rope light and is positioned on the Rope light
chaser PCB.
!" POWER REGULATOR PCB (1 x 1 AMP Fast Blow).
This fuse is for protection of the 12V DC Supply to the PCB's.
!" POWER REGULATOR PCB (1 x 3 AMP Fast Blow).
This fuse of the protection of the 24V DC Supply to the LED Display.
!" MAIN AC SUPPLY POWER FUSE (1 x 6 AMP Fast Blow).
This fuse is for the main AC supply and is situated in the IEC mains input socket.
* NOTE: The power cord must be removed before the fuse can be accessed.
As viewed from rear
MCU PCB FUSE
1AMP
FAST BLOW
28
POWER
REGULATOR FUSE
1AMP FAST BLOW
POWER
REGULATOR FUSE
3AMP FAST BLOW
LIGHTING FUSE 220V
AC FUSE 3 AMP
SLOW BLOW