VCD Playback
■
Press A-B (13) to mark start and end point of a video section to be
played repeatedly. Press once at the start and again at the end of
the section. Press A-B (13) again to cancel this repeat mode.
■
Press REPEAT (14) to select a chapter or title to be played repeat-
edly. Press REPEAT (14) again to cancel repeat mode.
■
Press ZOOM (28) to zoom in or out of the picture in several steps
(press repeatedly). Use the navigation buttons (8) to pan the
enlarged image.
■
Press ANGLE (27) during DVD playback to select the desired camera
angle. This function is only available for DVDs with scenes shot from
different camera angles.
■
Press USB (30) to select between disc and USB modes (overview of
the components (11)).
NOTE
►
If after pressing a button, the Ø icon is displayed, then the
corresponding function is not available.
►
The unit automatically turns off 30 minutes after a DVD has
ended if you made no further inputs during this period.
Press
(1) on the unit or POWER on the remote control to turn
the unit on. The display (4) shows ON. The unit is in the previously
selected mode.
Turn your TV set on.
Press SOURCE (unit button (6), remote control button (23)) to ac-
cess DVD playback mode. The display shows LOAD and NO DISC.
Press unit button
(3) or remote control button
open the DVD tray.
Insert a VCD with the label up.
Close the tray again (press (3) or (19) again).
VCD playback starts automatically.
■
Press
PLAY/PAUSE (16) to pause VCD playback, press again to
continue.
■
Press
STOP (15) to stop playback, press
start VCD playback again.
■
Press MENU/PBC (3) to access the interactive VCD menu
(if available on the VCD).
■
Press REPEAT (14) to select if a track or the entire VCD is to be
repeated. Press REPEAT (14) again to cancel repeat mode.
This function is not available in activated PBC mode (button (3)).
English
45
OPEN (19) to
PLAY/PAUSE (16) to